Maruto Wing Nail Nipper WN-3010, 120 mm Stainless Steel Nail Clipper with Curved Blade and Nail File

4.4 / 5 Loved by 14+

Maruto Wing Nail Nipper WN-3010, 120 mm Stainless Steel Nail Clipper with Curved Blade and Nail File

Name: Maruto Wing Nail Nipper WN-3010, 120 mm Stainless Steel Nail Clipper with Curved Blade and Nail File
Brand: Maruto
SKU: JPRIME-BTY-MARU-WING-WN3010
Price: 209.00 USD
Availability: InStock
Rating: 4.4 (14 reviews)

Brand Maruto

$209.00

Shipping calculated at checkout.

Brand Attributes

Maruto

Nail nipper makerStainless steel nail toolsWing series nippers

Model: WN-3010, Silver

WN-3010, Silver

Our nail nipper is a 120 mm stainless steel tool with a 13 mm concave blade, a wire spring and open-work wing-shaped handles that keep it to about 35 g. A nail file is included.

Available in stock

100% authentic

Vendor:Maruto

Questions? Ask Maruto →

Payments & Security

Secured Shipping

Estimated delivery:Oct 20 - Oct 24

Maruto Wing Nail Nipper WN-3010, 120 mm Stainless Steel Nail Clipper with Curved Blade and Nail File

$209.00

Brand	Maruto
Model	Wing WN-3010
Type	Nail nipper with nail file
Length	120 mm; blade 13 mm
Weight	About 35 g
Material	Stainless steel
Package	12 x 1.3 x 1 cm, 40 g

A 13 mm concave blade for a controlled cut
The blade is 13 mm long with a concave edge, as the listing states, and the head ends in a rounded, curved tip. This lets you take small, clean bites from a thick nail and follow the line of the nail edge instead of crushing it.
Light open-work wing-shaped handles for easy holding
The handles are cut with wing-shaped openings. The listing gives the weight as about 35 g, and the packed size as 12 x 1.3 x 1 cm, so the nipper is easy to hold and to carry in a pouch or a drawer.
All stainless steel with a wire spring
The body is stainless steel, and a wire spring between the handles opens the blades again after each cut. The photos show the spring clearly, so you can see how the hinge and the head fit together.
A nail file included to finish the edge
A nail file is named as an accessory in the listing. You cut with the nipper first and then smooth any rough edge with the file, which gives you a complete nail-trimming set without buying another tool.
Details that the listing does not confirm
The listing gives no country of origin, and the two weights it shows differ slightly, about 35 g in the description and 40 g in the details table. We therefore show no origin on this page and list both weights, so you can check them yourself.
Shipped directly from Japan, packed with care
We ship this nipper directly from Japan. The blade is sharp, so we pack it with care to protect the head and the edge from damage during transit, and we recommend you keep it dry and clean after use.

STORAGE

Wipe the blade dry after use and store the nipper in a dry place, with the blades closed and away from children.

SHELF LIFE

Durable item with no expiry date.

PREPARATION

No preparation required — ready to use as packaged.

IMPORTANT

The blade is sharp. Use only for trimming nails, cut away from your skin, and keep out of reach of small children. Stop use if you cut your skin, and do not use on skin that is broken or infected. Do not drop the nipper, which may damage the blade edge.

Specifications

Brand: Maruto
Model: Wing WN-3010
Type: Nail nipper with nail file
Length: 120 mm; blade 13 mm
Weight: About 35 g
Material: Stainless steel
Package: 12 x 1.3 x 1 cm, 40 g

Features

13 mm Blade: Concave edge.

Curved Tip: Follows the nail.

Wing Handles: Open-work, light.

Wire Spring: Opens each cut.

Stainless Steel: All-metal body.

Nail File: Smooths the edge.

Benefits

A 13 mm concave blade for a controlled cut: The blade is 13 mm long with a concave edge, as the listing states, and the head ends in a rounded, curved tip. This lets you take small, clean bites from a thick nail and follow the line of the nail edge instead of crushing it.

Light open-work wing-shaped handles for easy holding: The handles are cut with wing-shaped openings. The listing gives the weight as about 35 g, and the packed size as 12 x 1.3 x 1 cm, so the nipper is easy to hold and to carry in a pouch or a drawer.

All stainless steel with a wire spring: The body is stainless steel, and a wire spring between the handles opens the blades again after each cut. The photos show the spring clearly, so you can see how the hinge and the head fit together.

A nail file included to finish the edge: A nail file is named as an accessory in the listing. You cut with the nipper first and then smooth any rough edge with the file, which gives you a complete nail-trimming set without buying another tool.

Details that the listing does not confirm: The listing gives no country of origin, and the two weights it shows differ slightly, about 35 g in the description and 40 g in the details table. We therefore show no origin on this page and list both weights, so you can check them yourself.

Shipped directly from Japan, packed with care: We ship this nipper directly from Japan. The blade is sharp, so we pack it with care to protect the head and the edge from damage during transit, and we recommend you keep it dry and clean after use.

How to Use

Hold the nipper

Cut in small bites

Smooth the edge

Wipe and store

Who Is This For

The Thick-Nail Trimmer: You want a precise nail nipper that cuts thick nails cleanly, but dull or clumsy clippers crush thick nails and leave rough edges. Searching for the right nail nipper is tiring, and it is not your fault that it is hard to choose. Our nail nipper gives you a 120 mm stainless steel nipper, a wire spring and a nail file. It is a 120 mm stainless steel nipper of about 35 g, with a nail file included, so one nipper can steady your daily routine.

Product Story

The maker offers nail nippers and nail care tools, and this Wing model is a 120 mm stainless steel nipper with open-work handles and a nail file. The listing gives few facts about the maker and no country of origin, so we describe only the product as the listing and its seven close-up photos show it, without adding anything else. We ship it directly from Japan.

What's Inside

Maruto Wing Nail Nipper WN-3010

Care Guide

Storage: Wipe the blade dry after use and store the nipper in a dry place, with the blades closed and away from children.

Shelf Life: Durable item with no expiry date.

Important: The blade is sharp. Use only for trimming nails, cut away from your skin, and keep out of reach of small children. Stop use if you cut your skin, and do not use on skin that is broken or infected. Do not drop the nipper, which may damage the blade edge.

Ingredients and Materials

Stainless steel: Body and handles

Stainless steel and alloy steel: Blade, per the listing

Comparison

Quick Answer

Our nail nipper is a 120 mm stainless steel tool with a 13 mm concave blade, a wire spring and open-work wing handles of about 35 g, with a nail file included. It is a stainless steel tool for trimming nails, and we ship it directly from Japan.

The Thick-Nail Trimmer

Your nails are hard to cut. The 13 mm concave blade and the nipper-style head give you leverage and a controlled cut, so you can work in small, clean bites.

The Precision Perfectionist

You like a tidy edge. The curved, rounded blade tip lets you follow the nail line closely, and the included file smooths the edge after you cut.

The Light-Tool Preferrer

You find heavy tools tiring. The open-work handles keep the weight to about 35 g, so the nipper feels light in the hand during a long trimming session.

The Gift Giver

You want a gift for someone who cares about tools. An all-metal stainless nipper with a nail file makes a neat, practical present with a clean, simple look.

Frequently Asked Questions

How big is the nipper?

The nipper is 120 mm long overall with a 13 mm blade, according to the listing. The packed size is 12 x 1.3 x 1 cm, so it is small and flat. The description gives about 35 g for the weight and the details table says 40 g, so we show both so that you can compare them yourself.

What is it made of?

The listing says the body is stainless steel, and its details table also names stainless steel and alloy steel for the blade. A wire spring sits between the open-work handles. A nail file is included as an accessory, so that you can finish the nail edge after you cut it with the nipper, in one simple routine.

Where is it made?

The listing states no country of origin, so we do not show one on this page, and we do not guess. We ship the nipper directly from Japan. Please contact us before ordering if you need more detail, and we will answer as soon as we can with whatever the listing and the photos allow.

Is it suitable for thick nails?

The nipper-style head with a 13 mm concave blade is shaped for a controlled cut, and the photos show a curved tip that follows the nail line closely. We cannot promise how it performs on every nail, since hardness and thickness differ from person to person. Work in small bites, and cut away from your skin, because the blade is sharp.

How and when will my order ship?

We ship directly from Japan. Delivery takes 7-14 business days, and tracking is provided so you can follow your parcel from Japan to your door. Every product we send is carefully packed, and any item with a shelf life has a minimum of 6 months remaining. Please check our shipping page for current delivery options to your country. Thank you for shopping with us.